Automatic Ultrasonic Disposable Nonwoven Glove Making Machine
- Home
- Automatic Ultrasonic Disposable Nonwoven Glove Making Machine
Products Details
This automatic ultrasonic nonwoven glove making machine converts compatible roll-fed material into disposable gloves or mitts with welded edges. Buyers may also search for a nonwoven glove machine, disposable wash mitt making machine, ultrasonic mitt welding machine, or single-use protective glove production machine.
The equipment integrates material feeding, elastic feeding where required, ultrasonic welding, profile cutting, finished-product output, and automatic counting under PLC control. The source material states a production speed of 180 pcs/min. Actual output depends on the glove profile, size, layer count, material, elastic design, and weld path.
Machine Video
Confirmed Technical Information
| Parameter | Available specification |
|---|---|
| Production speed | 180 pcs/min as stated in the source material; confirm for the selected glove |
| Control method | PLC operating control |
| Joining method | Ultrasonic welding as identified in the product documentation |
| Elastic-feed monitoring | Automatic stop when elastic feeding is interrupted, where elastic is used |
| Counting | Automatic counting with preset-quantity stop |
| Finished size, material range, machine dimensions, power and voltage | Confirm for the selected configuration |
Integrated Process
- Automatic roll-material feeding and guiding
- Elastic feeding when required by the product design
- Ultrasonic welding along the glove or mitt profile
- Automatic profile cutting and finished-piece output
- Automatic counting and preset-quantity stop
Typical Applications
Potential products include disposable nonwoven gloves, cleaning mitts, wash mitts, cosmetic-treatment mitts, and compatible general protective hand covers. The exact application must be confirmed from material properties, finished samples, seam performance, and destination-market requirements.
Product and Compliance Scope
This page does not claim chemical resistance, examination-glove performance, surgical use, sterility, food-contact approval, or any certification. It also does not describe molded latex, nitrile, vinyl, or PE film glove production. The equipment forms welded gloves or mitts from compatible sheet material.
Information Required for a Quotation
- Finished glove or mitt drawing, dimensions, and physical samples
- Intended application and destination market
- Material composition, basis weight, thickness, width, and roll diameter
- Layer count, hand profile, cuff design, and elastic specification if used
- Required weld strength, output, counting, and packing method
- Factory voltage and frequency
