900 mm Pneumatic Dual-Circuit Impulse Sealing & Cutting Machine
- 首页
- 900 mm Pneumatic Dual-Circuit Impulse Sealing & Cutting Machine
产品详细信息
The 900 mm Pneumatic Dual-Circuit Impulse Sealing & Cutting Machine uses two independently controlled impulse-heating circuits for sealing and cutting compatible PE/EVA film components. It is intended for selected raincoat, sleeve, hood, disposable protective-garment and plastic-bag operations. Buyers may also search for a dual-heater pneumatic impulse sealer, raincoat sealing and cutting machine or 900 mm film welding station.
Machine Video
Technical Specifications
| 参数 | Specification |
|---|---|
| 电源 | 220 V, 50 Hz |
| Seal width options stated | 3 mm / 6 mm; confirm heating-wire arrangement |
| Maximum seal length stated | 900 mm |
| Impulse power | 2000 W |
| Adjustable sealing time | 0-9 seconds |
| Auxiliary function | Water-cooling unit |
| Operating air pressure shown in source | 4-6 MPa; must be reconfirmed before installation |
| Net machine weight | 75 kg |
| Machine dimensions (L x W x H) | 1100 x 500 x 1100 mm |
The source table states an operating pressure of 4-6 MPa, which requires technical reconfirmation. The two heating circuits allow separate time adjustment, but the exact seal-and-cut wire arrangement must be confirmed for the intended product.
Typical Applications
- Seal-and-cut operations for compatible PE or EVA raincoat parts
- Sleeve, hood and disposable protective-garment components
- Plastic bags and film assemblies within the confirmed seal length
- Custom film-product seams verified through sample sealing tests
Process Boundary
This is an operator-assisted station for sealing and cutting prepared film components. It does not feed roll material automatically, cut complete garment patterns, assemble an entire raincoat or protective suit, sterilize the product or pack finished goods. Component preparation, positioning fixtures, inspection and packaging are separate unless confirmed.
Material compatibility, seal and cut quality, waterproof performance and intended-use compliance require actual sample testing.
Information Required for a Quotation
- Product photos, seam or cut drawing and physical samples
- Film material, layer structure and thickness
- Required seal width, cut position and maximum length
- Straight or shaped tooling requirement
- Target cycle time and operator workflow
- Available compressed-air pressure and flow
- Local voltage, frequency and destination country
